| JTP101 |
JTP101 is fully resistant to solvents, petroleum products, oil and grease. Parts made of JTP101 maintain their superiority in a wide temperature range between (-) 30 and (+) 90 degrees, even in contact with solvents in humid environments. The excellent resistance of the JTP101 is remarkable in continuously applied loads, successive impacts, or in hot environments with continuous rising and falling. |
|
| JTA112 |
JTA112 is a type of plastic that is resistant to abrasion and bending. It has high strength under load. It has the ability to absorb water. For this reason, it is not preferred in areas that need to be in contact with water. It has high wear resistance and thermal stability. It shows high resistance to chemicals. |
|
| JTPK100 |
JTPK100 is a unique material that offers excellent chemical compatibility. Parts made of JTPK100 material can also operate at temperatures up to 260°C and have a melting point of around 341°C. Even when used for 5000 hours at 260 °C, the strength is almost the same as at the beginning and excellent in thermal stability. It has a long life in the harshest environments. |
|
| JZM1100 |
JZM1100 is a high impact and chemical resistant material suitable for larger parts. It has high wear resistance at low and medium speeds and performs particularly well in harsh conditions such as contact with sand or dust. Due to its stable mechanical properties and outstanding machinability, JZM1100 is the ideal engineering material for a wide variety of applications. |
|
| JZM1115 |
JZM1115 copolymer is a material with higher impact strength, lower moisture absorption and better creep resistance than Cast Nylon 6. |
|
| JZM202 |
JZM202 is an extruded hard material with high resistance to abrasion and impact. JZM202 is commonly used as a substitute for bronze, aluminum and other non-ferrous metals as it has significant weight advantages. The use of this material reduces lubrication requirements and is non-corrosive to mating surfaces. It has good mechanical properties. JZM202 is approved for food contact (BfR and FDA). It can also be custom produced in various colors. |
|
| JZM350XF |
JZM350XF is a partially bio-based Co-Polymer. It has similar properties with polyamide and very high flexibility. The viscosity of this Co-Polymer is also very high. The product is soft and absorbs 50% less water than Polyamide 6. |
|
| JZM675 |
JZM675 material has higher abrasion and friction resistance than other PE types, and these properties are due to their low friction coefficients when compared to metal and other materials. This material has very high abrasion resistance, good impact, chemical and electrical resistance. It does not absorb water. Mechanical processing is easy. |
|
| JZM900 |
JZM900 is a semi-crystalline thermoplastic and is characterized by its low coefficient of friction and good wear properties, unaffected by wet environments. JZM 900 offers good resistance to a wide variety of chemicals, including many solvents. It provides high strength and hardness along with easy machinability. The JZM900 is also noted for its high mechanical strength, heat resistance and good anti-friction properties. |
|
| JZM900 SW |
JZM900 SW has the same features as JZM900 material. It is the black colored version of the JZM900 material in line with customer demands. Just like the JZM900, it has advantageous properties such as elasticity, hardness, dimensional stability and superior durability. However, its resistance to acids and bases is weak. |
|
